Magsells Online Shop

MSMGK1000 1 Kilowatt microwave output.



 1000 watts microwave generator kit.

This kit is avaliabale with either a Air-cooled or water-cooled Magnetron.

220/240 volts 50Hz.  This kit will produce 900 Watts using a standard Single wave curcuit.

Please Note, this kit is avaliable without a filament transformer if it isnt requirwed.

For more information, please contact Magsells at

The Magsells HV Transformer based microwave generator kits are a simple and robust design. They use either a single HV transformer to form a half signal or, a twin HV transformer system utilising more of the usable power from the magnetron by using a full wave circuit. What system you use will depend on your requirements.  The standard and simple design uses a conventional 2.450 MHz continuous wave {CW} Magnetron similar to the frequency used in the normal domestic Microwave oven.

1000 watts Kit component listing.

1 x MST1000P **
1 x MSWGL132T 
1 x MSD202 
1 x MSCP09 1.0uf 2500 mf 
1 x MSAF021L 
1 x FH002 
1 x MSCP408 Small (small bracket 
1 x MSM601A
1 x MSM244M12A {MSM702} Air-cooled and water-cooled **

1 x 2 meter length of MSHTL2
1 x  High Voltage fuse 0.7 amps.
** Please note.
You will need to purchase a cooling fan unit as specificied. Forced air cooling 1500L/min; ambient temperature between 17 and 25℃
The HT Transformer will also require cooling with 2 x Forced air cooling 1000L/min; ambient temperature between 17 and 25℃

If a water-cooled magnetron is required, please ensure a water cooling flow rate of 1.9L/min at an ambient temperature.

Depending on the power operating time, you have the option of a water or air cooled magnetron. The water-cooled magnetron’s are generally used for longer processing system.

This generator kit must be assembled and connected by a qualified/trained electrical and or microwave engineer.

Additional information


Back to Top