1000 watts microwave generator kit.
This kit is avaliabale with either a Air-cooled or water-cooled Magnetron.
220/240 volts 50Hz. This kit will produce 900 Watts using a standard Single wave curcuit.
Please Note, this kit is avaliable without a filament transformer if it isnt requirwed.
For more information, please contact Magsells at enquire@magsells.com
The Magsells HV Transformer based microwave generator kits are a simple and robust design. They use either a single HV transformer to form a half signal or, a twin HV transformer system utilising more of the usable power from the magnetron by using a full wave circuit. What system you use will depend on your requirements. The standard and simple design uses a conventional 2.450 MHz continuous wave {CW} Magnetron similar to the frequency used in the normal domestic Microwave oven.
1000 watts Kit component listing.
1 x MST1000P **
1 x MSWGL132T
1 x MSD202
1 x MSCP09 1.0uf 2500 mf
1 x MSAF021L
1 x FH002
1 x MSCP408 Small (small bracket
1 x MSM601A
1 x MSM244M12A {MSM702} Air-cooled and water-cooled **1 x 2 meter length of MSHTL2
1 x High Voltage fuse 0.7 amps.** Please note.
You will need to purchase a cooling fan unit as specificied. Forced air cooling 1500L/min; ambient temperature between 17 and 25℃
The HT Transformer will also require cooling with 2 x Forced air cooling 1000L/min; ambient temperature between 17 and 25℃If a water-cooled magnetron is required, please ensure a water cooling flow rate of 1.9L/min at an ambient temperature.
Depending on the power operating time, you have the option of a water or air cooled magnetron. The water-cooled magnetron’s are generally used for longer processing system.
Warning
This generator kit must be assembled and connected by a qualified/trained electrical and or microwave engineer.
