Heavy duty 1.25 kilowatt microwave generator kit.
This kit is available with either a Air-cooled or water-cooled Magnetron.
220/240 volts 50 Hz. Full-wave producing 1.25 kilowatts
For more imformation, contact Magsells at enquires@magsells.com
The Magsells HV Transformer based microwave generator kits are a simple and robust design. They use either a single HV transformer to form a half signal or, a twin HV transformer system utilising more of the usable power from the magnetron by using a full wave circuit. What system you use will depend on your requirements. The standard and simple design uses a conventional 2.450 MHz continuous wave {CW} Magnetron similar to the frequency used in the normal domestic Microwave oven.
1.25 kilowatts Kit component listing.
2 x MST940 **
1 x MSWGL132T
4 x MSD201M
2 x MSCP09 0.9uf 2500 mf
2 x MSAF021L
3 x FH002
1 x MSAF024L
2 x MSCP408 Small (small bracket
2 x MSM601A
1 x MSM262M12A {MSM343} Air-cooled and water-cooled **
1 x MST32536 Filament transformer
1 x 2 meter length of MSHTL2
1 x 2 High Voltage fuse 0.7 amps.
** Please note.
You will need to purchase a cooling fan unit as specificied. Forced air cooling 1500L/min; ambient temperature between 17 and 25℃
The HT Transformer will also require cooling with 2 x Forced air cooling 1000L/min; ambient temperature between 17 and 25℃If a water-cooled magnetron is required, please ensure a water cooling flow rate of 1.9L/min at an ambient temperature.
Depending on the power operating time, you have the option of a water or air cooled magnetron. The water-cooled magnetron’s are generally used for longer processing system.
Warning
ingThis generator kit must be assembled and connected by a qualified/trained electrical and or microwave engineer.