Product Description
3 Kilowatts microwave generator kit.
This kit is available with either an Air-cooled or water-cooled Magnetron.
220/240 volts 50Hz.
Full-wave wiring diagram illustration 3 kilowatts
For more information, please contact Magsells at enquires@magsells.com.
The Magsells HV Transformer based microwave generator kits are a simple and robust design. They use either a single HV transformer to form a half signal or, a twin HV transformer system utilising more of the usable power from the magnetron by using a full-wave circuit. What system you use will depend on your requirements. The standard and simple design use a conventional 2.450 MHz continuous wave {CW} Magnetron similar to the frequency used in the normal domestic Microwave oven.
3.0 kilowatts Kit component listing.
2 x MST940 **
1 x MSWGL132T
4 x MSD201M
4 x MSCP603 0.85Mf 2500 mf
2 x MSAF021L
3 x FH002
1 x MSAF024L
4x MSCP408 Small (small bracket
2 x MSM601A
1 x MSM265M12A {2M285} Air-cooled and or water-cooled MSM265 M12 JW, LG part number 2M290-24 **
1 x MST32536 Filament transformer
2 x meter length of MSHTL2
2 x High Voltage fuse 1 amps.
** Please note.
You will need to purchase a cooling fan unit as specified. Forced air cooling 3.2L/min; ambient temperature between 17 and 25℃
The HT Transformer will also require cooling with 2 x Forced air cooling 2000L/min; ambient temperature between 17 and 25℃
If a water-cooled magnetron is required, please ensure a water cooling flow rate of 3.2L/min at an ambient temperature.
Depending on the power operating time, you have the option of water or air-cooled magnetron. The water-cooled magnetron is generally used for the longer processing system.
Warning
This generator kit must be assembled and connected by a qualified/trained electrical and or microwave engineer.
